氨基甲基吡啶改性氮化硼/线型低密度聚乙烯 复合材料的热性能及力学性能. (Chinese)
In: Polymer Materials Science & Engineering, Jg. 39 (2023-02-01), Heft 2, S. 43-50
academicJournal
Zugriff:
Aminomethylpyridine grafted linear low density polyethylene (LLDPE- g- Py) was successfully prepared with 4- aminomethylpyridine and maleic anhydride grafted linear low density polyethylene (LLDPE- gMAH), and then the modified BN/LLDPE (mBN/LLDPE) composites were prepared by melt blending. In the composites, due to the non- covalent action of LLDPE- g- Py and BN, the interfacial thermal resistance between filler and matrix is reduced, and BN is evenly dispersed in LLDPE matrix, so as to enhance the thermal conductivity of the composite. The thermal and mechanical properties of mBN/LLDPE composites were deeply studied. The results show that the thermal conductivity of mBN/LLDPE composites is greatly improved by the addition of LLDPE-g-Py, but too much LLDPE-g-Py will reduce its heat resistance. In order to improve the heat resistance of the composite, the LLDPE-g-Py mass fraction is fixed at 10%. When the BN mass fraction is 40%, the thermal conductivity of mBN/LLDPE composite reaches 0.95 W/(m · K), which is about 3 times that of pure LLDPE (0.32 W/(m·K)). At the same time, the tensile strength of mBN/LLDPE composites decreases slightly, and its elongation at break is significantly improved. [ABSTRACT FROM AUTHOR]
利用4-氨基甲基吡啶与马来酸酐接枝线型低密度聚乙烯(LLDPE-g-MAH)成功制备了氨基甲基吡啶接枝线型 低密度聚乙烯(LLDPE-g-Py), 然后采用熔融共混法制备了改性的BN/LLDPE(mBN/LLDPE)复合材料. 深入研究了 mBN/LLDPE复合材料的热性能和力学性能等. 结果表明, LLDPE-g-Py的加入, 使mBN/LLDPE复合材料的导热性能 得到很大提升, 但LLDPE-g-Py过多会导致其耐热性降低. 为了改善复合材料的耐热性, 将LLDPE-g-Py质量分数固定 为 10%. 当 BN 质量分数为 40%时, mBN/LLDPE 复合材料的导热系数达到了 0.95 W/(m·K), 为纯 LLDPE 导热系数 (0.32 W/(m·K))的3倍. 同时, mBN/LLDPE复合材料的拉伸强度在小幅度下降的情况下, 其断裂伸长率得到明显的 改善. [ABSTRACT FROM AUTHOR]
Copyright of Polymer Materials Science & Engineering is the property of Sichuan University, Polymer Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Titel: |
氨基甲基吡啶改性氮化硼/线型低密度聚乙烯 复合材料的热性能及力学性能. (Chinese)
|
---|---|
Autor/in / Beteiligte Person: | 敢, 唐 ; 雪, 柯 ; 姗, 董 ; 张兆阳 ; 峰, 游 ; 蓉, 陈 ; 刘仿军 ; 江学良 |
Zeitschrift: | Polymer Materials Science & Engineering, Jg. 39 (2023-02-01), Heft 2, S. 43-50 |
Veröffentlichung: | 2023 |
Medientyp: | academicJournal |
ISSN: | 1000-7555 (print) |
DOI: | 10.16865/j.cnki.1000-7555.2023.0040 |
Sonstiges: |
|