Influence of the width of cut in ultrasonic vibration superimposed face milling of X46Cr13 and X40CrMoV5-1 on the surface microstructure and CVD diamond coating adhesion.
In: Procedia CIRP, Jg. 123 (2024-07-01), S. 215-220
Online
academicJournal
Zugriff:
Ultrasonic vibration superimposed milling (UVSM) with an oscillating movement of the specimen in the direction of the tool axis is an efficient method for the generation of microstructured functional surfaces. The application of end milling cutters with a diameter smaller than the length and the width of the surface to be structured generally results in recuts and path overlaps. In order to avoid surface recutting, a small lead angle was realized by slightly tilting the ultrasonic system with the specimen. The overlapping area of two adjacent paths was kinematically simulated for different widths of cut (from 70% to 90% of the tool diameter). Cutting experiments were carried out by UVSM of X46Cr13 and X40CrMoV5-1 steel specimens to investigate the influence of the width of cut on the surface generated in the overlapping area and also the adherence of a subsequently deposited CVD diamond layer. For this purpose, 3-D laser scanning microscopy and SEM analysis were applied. The knowledge gained allows for designing UVSM processes, especially regarding 3-D freeform surfaces with defined microstructures subjected to CVD diamond coating. [ABSTRACT FROM AUTHOR]
Copyright of Procedia CIRP is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Titel: |
Influence of the width of cut in ultrasonic vibration superimposed face milling of X46Cr13 and X40CrMoV5-1 on the surface microstructure and CVD diamond coating adhesion.
|
---|---|
Autor/in / Beteiligte Person: | Börner, Richard ; Helmreich, Thomas ; Schubert, Andreas ; Rosiwal, Stefan |
Link: | |
Zeitschrift: | Procedia CIRP, Jg. 123 (2024-07-01), S. 215-220 |
Veröffentlichung: | 2024 |
Medientyp: | academicJournal |
ISSN: | 2212-8271 (print) |
DOI: | 10.1016/j.procir.2024.05.039 |
Sonstiges: |
|