Synthesis, Characterization, and Crystal Structure of a Novel Acetate-bridged Polynuclear Schiff Base Copper(II) Complex.
A novel acetate‐bridged polynuclear Schiff base copper(II) complex, [CuL(CH3COO)]n (L=4‐nitro‐2‐[(2‐methylaminoethylimino)methyl]phenol), has been synthesized and characterized by elemental analysis, IR spectrum and single crystal X‐ray diffraction. Each Cu atom in the complex is five‐coordinate in a trigonal‐bipyramidal configuration, with one imine N atom and two acetate O atoms defining the basal plane, and one phenolate O and one amine N atoms occupying the axial positions. The [4‐nitro‐2‐[(2‐methylaminoethylimino)methyl]phenolato]copper(II) units are linked by the bridging acetate ligands, forming polymeric chains running along the c axis.
Keywords: synthesis; crystal structure; Schiff base; copper complex; polynuclear complex
Introduction
Polynuclear complexes play an important role in the development of coordination chemistry related to magnetism and molecular architectures.[[1]] The prime strategy for designing these molecular materials is to use suitable bridging ligands that determine the nature of the magnetic interactions.[[6]] One to the versatile coordination modes of the acetate ligand and the wide range of magnetic coupling mediated by the acetate bridges, this ligand has become one of the most extensively studied building blocks in the field.[[10]]
In this paper, the author designed and synthesized the flexible tridentate Schiff base ligand 4‐nitro‐2‐[(2‐methylaminoethylimino)methyl]phenol (L). The complexes derived from the Schiff base ligand 2‐[2‐(methylamino)ethyliminomethyl]phenol[13] as well as its derivatives[14][15] have been widely studied; however, to our knowledge those from the similar Schiff base ligand L have never been reported so far. The acetate ligand readily bridges different metal ions through the O atoms. We report herein the synthesis, characterization and crystal structure of a novel acetate‐bridged polynuclear Schiff base copper(II) complex [CuL(CH3COO)]n.
Experimental
Materials and Measurements
Commercially available 5‐nitrosalicylaldehyde and N‐methylethane‐1,2‐diamine were purchased from Sigma and used without further purification. Other solvents and reagents were made in China and used as obtained. C, H and N elemental analyses were performed with a Perkin‐Elmer 240C elemental analyzer. The IR spectra were measured with a FT‐IR 170‐SX (Nicolet) spectrophotometer.
Synthesis of L
The ligand L was prepared by the condensation of 5‐nitrosalicylaldehyde (1.0 mmol, 167.1 mg) with N‐methylethane‐1,2‐diamine (1.0 mmol, 74.1 mg) in methanol (30 mL) at room temperature. Anal. Calcd. for C10H13N3O3 (FW 223.2): C, 53.81; H, 5.87; N, 18.82. Found: C, 53.60; H, 5.95; N, 18.73%. Yield, 171.0 mg (76.7% on the basis of 5‐nitrosalicylaldehyde). Selected IR data (KBr, cm−1): 3428 (m), 3217 (m), 2982 (m), 2937 (m), 2871 (m), 1655 (s), 1535 (s), 1354 (s), 1230 (m), 720 (m).
Synthesis of [CuL(CH 3 COO)] n
To a stirred methanol solution (10 mL) of L (0.1 mmol, 22.3 mg) was added an aqueous solution (3 mL) of Cu(CH3COO)2 · H2O (0.1 mmol, 19.9 mg). The mixture was stirred for 30 min at room temperature to give a deep blue solution. Blue block‐shaped crystals of the complex, suitable for X‐ray single crystal analysis, were formed at the bottom of the vessel on slow evaporation of the solvent for a week. The isolated crystals were washed three times with cold methanol, and dried in a vacuum over anhydrous CaCl2. Anal. Calcd. for C12H15CuN3O5 (FW 344.8): C, 41.80; H, 4.38; N, 12.19. Found: C, 42.05; H, 4.50; N, 12.03%. Yield, 18.0 mg (52.2% on the basis of L). Selected IR data (KBr, cm−1): 3451 (m), 2982 (m), 2935 (m), 2872 (w), 1618 (s), 1573 (s), 1532 (s), 1408 (s), 1345 (s), 1180 (s), 623 (s).
Data Collection, Structural Determination And Refinement
Crystal Structure Determination
Diffraction intensities for the complex were collected at 298(2) K using a Bruker SMART APEXII CCD area‐detector with MoKα radiation (λ=0.71073 Å). The collected data were reduced using the SAINT program,[16] and multi‐scan absorption corrections were performed using the SADABS program.[17] The structure was solved by direct method and refined against F2 by full‐matrix least‐squares method using the SHELXTL program.[18] All of the non‐hydrogen atoms were refined anisotropically. Atom H2 attached to N2 was located in a difference Fourier map and refined isotropically, with N‐H distance restrained to 0.90(1) Å. All other H atoms in the complex were placed in calculated positions and constrained to ride on their parent atoms. The crystallographic data for the complex are summarized in Table 1. Selected bond lengths and angles are given in Table 2. Crystallographic data for the complex has been deposited with the Cambridge Crystallographic Data Centre (CCDC 637666).
Table 1 Crystallographic and experimental data for the complex
Formula | C12H15CuN3O5 |
FW | 344.81 |
Crystal shape/colour | Block/blue |
Crystal size/mm | 0.30×0.23×0.22 |
Crystal system | Monoclinic |
Space group | P21/c |
a/Å | 14.057(2) |
b/Å | 11.091(2) |
c/Å | 9.341(1) |
β/° | 92.149(2) |
V/Å3 | 1455.3(3) |
Z | 4 |
λ (MoKα)/Å | 0.71073 |
T/K | 298(2) |
µ/mm−1 (Mo−Kα) | 1.525 |
Tmin | 0.658 |
Tmax | 0.730 |
Reflections/parameters | 3319/195 |
Independent reflections | 2756 |
F(000) | 708 |
Goodness of fit on F2 | 1.046 |
R1, wR2 [I≥2σ(I)]a | 0.0356, 0.1069 |
R1, wR2 (all data)a | 0.0434, 0.1122 |
aR1=∑||Fo|−|Fc||/∑|Fo|, wR2=[∑w(Fo2−Fc2)2/∑w (Fo2)2]1/2. |
Table 2 Selected bond lengths (Å) and bond angles (°) for the complex
Cu1‐N1 | 2.062(2) | Cu1‐N2 | 2.186(2) |
Cu1‐O1 | 2.068(2) | Cu1‐O4 | 1.986(2) |
Cu1‐O5A | 2.020(2) | | |
O4‐Cu1‐O5A | 108.3(1) | O4‐Cu1‐N1 | 122.7(1) |
O5A‐Cu1‐N1 | 128.7(1) | O4‐Cu1‐O1 | 95.3(1) |
O5A‐Cu1‐O1 | 84.9(1) | N1‐Cu1‐O1 | 86.1(1) |
O4‐Cu1‐N2 | 104.2(1) | O5A‐Cu1‐N2 | 92.2(1) |
N1‐Cu1‐N2 | 80.5(1) | O1‐Cu1‐N2 | 160.2(1) |
Results and Discussion
Preparation of the Ligand and the Complex
The author herein designed and synthesized the flexible Schiff base ligand L (as shown in Scheme 1). The acetate anion can bridge different metal ions through the two O atoms,[[13]] forming polynuclear structures. The copper(II) complex was synthesized according to the procedure as shown in Scheme 2.
Graph: SCH. 1.
Graph: SCH. 2.
When compared to the structure the author had reported recently,[14] we can obviously found that the acetate anion is a good bridging group, and play an important role in the formation of the polymeric structure.
Stability in Air and Solubility in General Solvents
The Schiff base ligand L are yellow crystallite, stable in air at room temperature. It is soluble in polar organic solvents, such as MeOH, EtOH, MeCN and Me2CO, but insoluble in water and Et2O. The complex is also stable in air at room temperature, soluble in DMF, DMSO, MeOH, EtOH and MeCN, insoluble in water and Et2O.
Structure Description of the Complex
The molecular structure and the molecular packing of the complex are shown in Figure 1 and Figure 2, respectively. The complex is a novel acetate‐bridged polynuclear copper(II) compound. Each Cu atom in the complex is five‐coordinate in a trigonal‐bipyramidal configuration, with one imine N atom and two acetate O atoms defining the basal plane, and one phenolate O and one amine N atoms occupying the axial positions. The significant distortion of the trigonal‐bipyramid is revealed by the bond angles between the axial and basal donor atoms. The O1‐Cu1‐N2 bond angle in the complex deviates from 180° by 19.8(1)°, as a result of the strain created by the five‐membered chelate ring Cu1/N1/C8/C9/N2. The angles between the two axial donors and the three equatorial donor atoms range from 80.5(1)° for the N1‐Cu1‐N2 angle to 104.2(1)° for the O4‐Cu1‐N2 angle. The three equatorial angles range from 108.3(1)° for O4‐Cu1‐O5 to 128.7(1)° for O5‐Cu1‐N1, showing only slight differences from the ideal value of 120°. The bond lengths subtended at the metal centers are comparable to the corresponding values observed in other similar copper(II) complexes[[19]] and, as expected, the bonds involving amine N atoms are longer than those involving imine N atoms. The acetate anions act as bridging ligands and coordinate to the metals through the two O atoms. The deviation of atom Cu1 from the least‐squares plane defined by the three basal donors is 0.054(1) Å.
Graph: Fig. 1. The structure of the complex, showing the atom‐numbering scheme. Displacement ellipsoids are drawn at the 30% probability level. H atoms have been omitted for clarity. Atoms labeled with the suffix A are at the symmetry positions x, 1/2− y, 1/2+z.
Graph: Fig. 2. The molecular packing of the complex, viewed along the a axis.
In the crystal structure of the complex, the [4‐nitro‐2‐[(2‐methylaminoethylimino)methyl]phenolato]copper(II) units are linked by the bridging acetate ligands, forming polymeric chains running along the c axis.
Acknowledgments
This project was financially supported by the Science and Technology Plan of Huzhou (No. 2007YZ06).
[
References
1
Eshel, M., Bino, A., Felner, I., Johnston, D.C., Luban, M. and Miller, L.L.2000. Polynuclear chromium(III) carboxylates. 1. Synthesis, structure, and magnetic properties of an octanuclear complex with a ring structure. Inorg. Chem., 39: 1376–1380.
2
Jiang, Y.‐B., Kou, H.‐Z., Wang, R.‐J., Cui, A.‐L. and Ribas, J.2005. Synthesis, crystal structure, and magnetic properties of oxime‐bridged polynuclear Ni(II) and Cu(II) complexes. Inorg. Chem., 44: 709–715.
3
Escuer, A., Goher, M.A. S., Mautner, F.A. and Vicente, R.2000. Three new polynuclear copper(II) complexes with the symmetric [Cu(µ1,1−N3)2Cu]2+ core and pyridine derivatives: Syntheses, structure, and magnetic behavior. Inorg. Chem., 39: 2107–2112.
4
El‐Behairy, M., Khalil, S.M. E., Ishak, M.F. and Abd El‐Halim, H.F.1997. Tetra‐ and polynuclear metal complexes derived from an oxamido homodinuclear Cu(II) complex as a chelating agent. Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 27: 907–920.
5
Manhas, B.S., Sardana, A.K. and Kalia, S.B.2005. Synthesis, magnetic and spectroscopic characterization of copper(II) toluate complexes with substituted piperazines. Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 35: 171–179.
6
Salem, N.M. H.2005. Synthesis and magnetic properties of copper(II) complexes derived from dihydrazones. Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 35: 369–377.
7
Dey, S.K., Mondal, N., El Fallah, M.S., Vicente, R., Escuer, A., Solans, X., Font‐Bardia, M., Matsushita, T., Gramlich, V. and Mitra, S.2004. Crystal structure and magnetic interactions in nickel(II) dibridged complexes formed by two azide groups or by both phenolate oxygen‐azide, ‐thiocyanate, ‐carboxylate, or –cyanate groups. Inorg. Chem., 43: 2427–2434.
8
Li, Y.‐T., Yan, C.‐W., Zhu, C.‐Y. and Guan, H.‐S.2005. Synthesis and magnetic studies of μ‐oxamido‐bridged copper(II)‐manganese(II) heterobinuclear complexes. Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 34: 1165–1179.
9
Dohlakiya, P.P. and Patel, M.N.2005. tMetal complexes: Preparation, magnetic, spectral, and biocidal studies of some mixed‐ligand complexes with Schiff bases containing NO and NN donor atoms. Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 34: 553–563.
Koval, I.A., Gamez, P., Roubeau, O., Driessen, W.L., Lutz, M., Spek, A.L. and Reedijk, J.2003. Century‐known copper salt Cu(OAc)(OMe) proven to be a unique magnetic lattice composed of tetranuclear copper(II) species with a rare binding mode of the acetate anion. Inorg. Chem., 42: 868–872.
Clemente‐Juan, J.M., Chansou, B., Donnadieu, B. and Tuchagues, J.‐P.2000. Synthesis, structure, and magnetic properties of the low‐symmetry tetranuclear cubane‐like nickel complex [Ni4(pypentO)(pym)(µ3‐OH)2(µ‐Oac)2(NCS)2(OH2)]. Inorg. Chem., 39: 5515–5519.
Tangoulis, V., Raptopoulou, C.P., Terzis, A., Paschalidou, S., Perlepes, S.P. and Bakalbassis, E.G.1997. Octanuclearity in copper(II) chemistry: Preparation, characterization, and magnetochemistry of [Cu8(dpk · OH)8(O2CCH3)4](ClO4)4 · 9H2O (dpk · H2O=the hydrated, gem‐diol form of di‐2‐pyridyl ketone). Inorg. Chem., 36: 3996–4006.
Ma, J.‐Y., Lv, B.‐L., Gu, S.‐H., Guo, J.‐W. and Yin, W.‐P.2006. Dibromo{2‐[2‐(methylamino)ethyliminomethyl]phenolato}zinc(II). Acta Crystallogr., E62: m1322–m1323.
Wang, C.‐Y.2007. Bis{2‐[2‐(isopropylamino)ethyliminomethyl]–4‐nitrophenolato}copper(II) dinitrate. Acta Crystallogr., E63: m489–m491.
Sun, Y.‐X.2006. Synthesis, crystal structures and antibacterial activities of two Schiff base copper(II) complexes. Synth. React. Inorg. Met‐Org. Nano‐Met. Chem., 36: 621–625.
Bruker, SMART and SAINT. 2002. Madison, Wisconsin, , USA: Bruker AXS Inc..
Sheldrick, G.M.1996. "SADABS". In Program for Empirical Absorption Correction of Area DetectorGermany: University of Göttingen.
Sheldrick, G.M. "SHELXTL V5.1". In Software Reference ManualMadison, Wisconsin, , USA: Bruker AXS, Inc..
Mikuriya, M., Nakadera, K. and Lim, J.‐W.2002. µ‐Phenoxo‐µ‐pyrazolato‐bridged dinuclear copper(II) complex with 2,6‐bis(salicylideneaminomethyl)‐4‐methylphenol. Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 32: 117–125.
Lashanizadegan, M. and Boghaei, D.M.2001. Template synthesis and X‐ray structure determination of unsymmetrical tetradentate Schiff base complexes of nickel(II) and copper(II). Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 31: 1519–1529.
Mohanan, K., Devi, S.N. and Murukan, B.2006. Complexes of copper(II) with 2‐(N‐salicylideneamino)‐3‐carboxyethyl‐4,5,6,7‐tetrahydrobenzo[b]thiophene containing different counter anions. Synth. React. Inorg. Met.‐Org. Nano‐Met. Chem., 36: 441–449.
]
By Chenyi Wang
Reported by Author