Crack-growth behavior of epoxy adhesives modified with liquid rubber and cross-linked rubber particles under mode I loading
In: International Journal of Adhesion and Adhesives, Jg. 29 (2009), S. 45-55
Online
unknown
Zugriff:
The crack-growth resistance (R-curve) of bulk single-edge notch bend (SENB) and adhesively bonded double cantilever beam (DCB) specimens was investigated under mode I loading conditions using two types of rubber-modified epoxy adhesive: one was a liquid rubber (CTBN)-modified adhesive and the other was a cross-linked rubber particle (DCS)-modified adhesive. As a result, for both the SENB and DCB specimens, the gradient of the R-curve for the DCS-modified adhesive was steeper than that for the CTBN-modified one, however, the difference in fracture toughness between DCS- and CTBN-modified adhesives is smaller for DCB than for SENB specimens. To elucidate such behavior, crack-growth simulation based on Gurson's model was conducted, where the DCS- and CTBN-modified adhesives were characterized by both the initial void fraction and nucleation. The difference in the behavior of R-curves was also observed in simulations. Moreover, it was found that the difference in fracture surface roughness observed by SEM for both adhesives correspond to the variation in R-curves.
Titel: |
Crack-growth behavior of epoxy adhesives modified with liquid rubber and cross-linked rubber particles under mode I loading
|
---|---|
Autor/in / Beteiligte Person: | Motohashi, Satoshi ; Nakamura, Yoshinobu ; Kimoto, Masaki ; Nishi, Kazuaki ; Imanaka, Makoto |
Link: | |
Zeitschrift: | International Journal of Adhesion and Adhesives, Jg. 29 (2009), S. 45-55 |
Veröffentlichung: | Elsevier BV, 2009 |
Medientyp: | unknown |
ISSN: | 0143-7496 (print) |
DOI: | 10.1016/j.ijadhadh.2007.11.004 |
Schlagwort: |
|
Sonstiges: |
|