Microstructure and Photocatalytic Property of SiO2-TiO2 Under Various Process Condition

Nanophase silica-titania particles were prepared by two different synthetic routes, namely, sol–gel and hydrothermal processing. The crystallinity and crystallographic phases, particle size and surface area of the materials were controlled by varying the calcination temperature, and/or the ratio of Si to Ti. It was determined by XRD that the crystallite sizes of SiO2-TiO2 prepared by sol–gel and hydrothermal processing decreased from 11 to 6 nm and 12 to 9 nm, respectively, as the mole fraction of silica was increased from 0.1 to 0.4. It is proposed that the presence of the amorphous silica suppresses the growth of anatase TiO2 grains and their phase transformation to rutile. The photocatalytic decomposition rate of 1,4-dichlorobenzene (DCB) in aqueous solution with the sol–gel derived SiO2-TiO2 powder prepared at 750 °C was about 10 ± 5% higher than that observed with Degussa P25, whereas the SiO2-TiO2 samples prepared by hydrothermal processing at 250 °C showed a slightly lower decomposition rate than P25.