Recycling of construction and demolition waste for producing new construction material (Brazil case-study)
In: Construction and Building Materials, Jg. 123 (2016-10-01), S. 594-600
Online
unknown
Zugriff:
Made available in DSpace on 2018-12-11T17:04:20Z (GMT). No. of bitstreams: 0 Previous issue date: 2016-10-01 Construction and demolition waste corresponds to 50% of all urban solid waste, usually it is dumped in improper places. This work reuses this waste as substitute of natural aggregate to produce bricks. Lime and cement were used as binding agents and were pressed using a uniaxial hydraulic press. After 21 days curing were submitted to compression tests, the probes presented an average resistance greater than 4 MPa, which is higher than standards. Water absorption, apparent porosity and density were also determined. The results show that it is possible to produce low-cost bricks with excellent physical properties using CDW as aggregate and lime or cement as additive. Department of Applied Physics University of Huelva Campus de Excelencia Internacional del Mar (CEIMAR) Universidade Estadual Paulista – UNESP FCT/DFQB, Presidente Prudente – SP Universidade do Oeste Paulista – UNOESTE LABCIVIL, Presidente Prudente – SP Universidade Estadual Paulista – UNESP FCT/DFQB, Presidente Prudente – SP
Titel: |
Recycling of construction and demolition waste for producing new construction material (Brazil case-study)
|
---|---|
Autor/in / Beteiligte Person: | Gregório, G.C. ; G.A.C. da Silva ; Cardoso, D.S.L. ; Murilo Cesar Lucas ; A. E. de Souza ; Silvio Rainho Teixeira ; A. dos Santos ; Lima, L.C.N. ; Contreras, Manuel ; University of Huelva ; Universidade Estadual Paulista (Unesp) ; LABCIVIL |
Link: | |
Zeitschrift: | Construction and Building Materials, Jg. 123 (2016-10-01), S. 594-600 |
Veröffentlichung: | Elsevier BV, 2016 |
Medientyp: | unknown |
ISSN: | 0950-0618 (print) |
DOI: | 10.1016/j.conbuildmat.2016.07.044 |
Schlagwort: |
|
Sonstiges: |
|