In-depth inhomogeneities in CIGS solar cells: Identifying regions for performance limitations by PIXE and RBS

When considering materials to be used as active layers in solar cells, an important required parameter is the proper knowledge of their elemental composition. It should be heavily controlled during growth in order to obtain the desired band gap and to decrease the recombination defects and then increase the solar cell electrical performance. Ion beam analytical (IBA) techniques and, in particular, particle-induced X-ray emission (PIXE) and elastic backscattering spectrometry (EBS) are quite suitable to determine the thickness and composition of such active layers. Furthermore, if these techniques are performed using a nuclear microprobe, lateral and in-depth inhomogeneities can be clearly observed from 2D maps. In many cases, composition variations can be detected from the classical 2D maps obtained from the PIXE spectra. In this work, it is shown how the in-depth variations can also be studied when considering 2D maps reconstructed from the EBS spectra. Such variations are derived from processing conditions and can be related to (i) composition, (ii) thickness, (iii) roughness, and (iv) other nontrivial issues. Examples obtained on Cu(In,Ga)Se-2-based cells are presented and discussed. Furthermore, the combination of IBA techniques such as PIXE and EBS is shown to be a competitive and alternative method to the more used and established techniques such as X-ray fluorescence for checking the average composition of the solar cell active layers or secondary ion mass spectroscopy for determination of the elemental depth profile. info:eu-repo/semantics/publishedVersion