Knoop hardness of dental resin cements: Effect of veneering material and light curing methods
In: Polymer Testing; Polymer Testing. Oxford: Elsevier B.V., v. 26, n. 2, p. 268-273, 2007.; WOS:000244769400017;; (2014) S. 268-273
Online
unknown
Zugriff:
This study evaluated the Knoop hardness of one resin cement (dual-cure mode or light-cure mode) when illuminated directly or through restorative materials-ceramic (HeraCeram) or composite (Artglass)-by two light curing units. Light curing was carried out using a conventional quartz tungsten halogen (QTH) light source (XL2500) for 40 s, and a light emitting diodes (LED) light source (Ultrablue Is) for 40 s. Bovine incisors had their buccal faces flattened and hybridised. on these surfaces, a mould was seated and filled with cement. A disc of the veneering material (1.5 mm thickness) was positioned over this set for light curing. After storage (24 h/37 degrees C), samples (n = 10) were sectioned for hardness (KHN) measurements. Data were submitted to ANOVA and to Tukey's test (alpha = 0.05). In general, light curing with LED resulted in higher hardness values than QTH. Distinct cement behaviour was observed with different veneering material in association with different light curing units (LCUs). (C) 2006 Elsevier Ltd. All rights reserved.
| Titel: |
Knoop hardness of dental resin cements: Effect of veneering material and light curing methods
|
|---|---|
| Autor/in / Beteiligte Person: | Tango, Rubens Nisie ; Coelho Sinhoreti, Mario Alexandre ; Correr, Americo Bortolazzo ; Jochims Schneider, Luis Felipe ; Kimpara, Estevão Tomomitsu ; Correr-Sobrinho, Lourenco ; Universidade Estadual Paulista (UNESP) |
| Link: | |
| Quelle: | Polymer Testing; Polymer Testing. Oxford: Elsevier B.V., v. 26, n. 2, p. 268-273, 2007.; WOS:000244769400017;; (2014) S. 268-273 |
| Veröffentlichung: | Elsevier B.V., 2014 |
| Medientyp: | unknown |
| ISSN: | 0142-9418 (print) |
| DOI: | 10.1016/j.polymertesting.2006.10.010 |
| Schlagwort: |
|
| Sonstiges: |
|