Potential of PEDOT: PSS as a hole selective front contact for silicon heterojunction solar cells
In: SCIENTIFIC REPORTS, 2017
Online
academicJournal
Zugriff:
We show that the highly conductive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT: PSS) can successfully be applied as a hole selective front contact in silicon heterojunction (SHJ) solar cells. In combination with a superior electron selective heterojunction back contact based on amorphous silicon (a-Si), mono-crystalline n-type silicon (c-Si) solar cells reach power conversion efficiencies up to 14.8% and high open-circuit voltages exceeding 660 mV. Since in the PEDOT: PSS/cSi/ a-Si solar cell the inferior hybrid junction is determining the electrical device performance we are capable of assessing the recombination velocity (v(I)) at the PEDOT: PSS/c-Si interface. An estimated v(I) of similar to 400 cm/s demonstrates, that while PEDOT: PSS shows an excellent selectivity on n-type c-Si, the passivation quality provided by the formation of a native oxide at the c-Si surface restricts the performance of the hybrid junction. Furthermore, by comparing the measured external quantum efficiency with optical simulations, we quantify the losses due to parasitic absorption of PEDOT: PSS and reflection of the device layer stack. By pointing out ways to better passivate the hybrid interface and to increase the photocurrent we discuss the full potential of PEDOT: PSS as a front contact in SHJ solar cells.
Titel: |
Potential of PEDOT: PSS as a hole selective front contact for silicon heterojunction solar cells
|
---|---|
Autor/in / Beteiligte Person: | Jaeckle, S. ; Liebhaber, M. ; Gersmann, C. ; Mews, M. ; Jaeger, K. ; Christiansen, S. ; Lips, K. |
Link: | |
Zeitschrift: | SCIENTIFIC REPORTS, 2017 |
Veröffentlichung: | 2017 |
Medientyp: | academicJournal |
DOI: | 10.1038/s41598-017-01946-3 |
Sonstiges: |
|