Design and characterisation of monolithic CMOS detectors for high energy particle physics and SEU radiation tests for ATLAS Inner Tracker Upgrade readout chip

This thesis covers the characterisation results and the design of monolithic CMOS detectors designed in TowerJazz 180nm CMOS technology for High Energy Particle Physics applications. Three different detectors have been studied the MALTA, the Mini-MALTA and the MALTA2. The MALTA sensor showed some efficiency losses at the corners of the pixels after irradiation, which meant that it was not suitable for the radiation environments in which it was supposed to be installed. Therefore, the front-end electronics and the fabrication process were modified to overcome this issue. The Mini-MALTA prototype was designed including the above mentioned improvements, fabricated and fully characterised. Finally taking into account all the knowledge acquired during these years of developments another large scale sensor the MALTA2 has been produced which should be radiation tolerant and have very good time resolution. The description and studies of the different architectures used in this family of detectors are covered and a simulation to estimate the bandwidth capabilities have been reported. Furthermore, this work will present characterisation of single event effects in the ITkPixV1, the prototype version of the ATLAS Inner Tracker Upgrade chip for the High Luminosity LHC. Measurements were made in testbeam campaigns with high energy ions and protons to evaluate the level of single event effects in the chip.