An X-ray guide tube and a desk-top scanning X-ray analytical microscope
In: Micro x-ray fluorescence analysis, Jg. 26 (1997), Heft 6, S. 380-387
Online
academicJournal
- print, 11 ref
Zugriff:
A fine x-ray beam, less than 10 pm in diameter, was produced using a small x-ray tube and an x-ray guide tube (XGT) with a parabolic inner contour. The beam was directed vertically on to the sample, which was mounted on an x-y scanning stage. The transmitted x-rays were measured with an NaI(Tl) scintillation detector and the fluorescent, back-scattered and diffracted x-rays were simultaneously detected by an hp-Si detector. The scanning images of transmitted, fluorescent and other x-rays were obtained by accumulating the detected signals. A scanning image of the lower layer of a four-layer, printed-circuit board was obtained by subtracting the fluorescent x-ray image from the x-ray transmitted image. Using diffracted x-rays, distribution images of crystal grains could be made. The method for fabricating the XGT is described and examples of applications of a desk-top scanning x-ray analytical microscope are shown.
Titel: |
An X-ray guide tube and a desk-top scanning X-ray analytical microscope
|
---|---|
Autor/in / Beteiligte Person: | HOSOKAWA, Y ; OZAWA, S ; NAKAZAWA, H ; NAKAYAMA, Y |
Link: | |
Zeitschrift: | Micro x-ray fluorescence analysis, Jg. 26 (1997), Heft 6, S. 380-387 |
Veröffentlichung: | Chichester: Wiley, 1997 |
Medientyp: | academicJournal |
Umfang: | print, 11 ref |
ISSN: | 0049-8246 (print) |
Schlagwort: |
|
Sonstiges: |
|